Prism 2 TEK Rebreather
Double click for enlarge
SKU: 240-6520-000

Prism 2 TEK Rebreather

Quantity:
$ 8,499.95

The Prism 2 rebreather is a back mount closed circuit rebreather in a league of it's own. It's front mounted counter lungs create an incredible work of breathing like no other. An Antsi test (done by a 3rd party) gave the Prism 2 TEK a rating of .94 J/L

The unit is powered by the sherwater petral 2 and uses the Buhlmann XHL-16C and has been modified to use gradient factors. In addition to the wrist mounted computer, the Prism 2 comes with a Sherwater Divecan Heads up Display (HUD). 

Included in Purchase

 

 

Prism 2

  • Shoulder mounted counterlungs provide easy breathing with low hydrostatic loading
  • Lowest Work of Breathing in industry at 0.94 J/L - Tested at 100M by ANSTI
  • Unit weight when fully charged, in standard configuration - approx. 47lbs
  • 3.5 Liter split counterlungs allows inhale and exhale counterlungs for high work loads
  • Counterlung drains make it easy to remove water during a dive
  • All gas lines external to the breathing loop prevents leaks from affecting the PPO2
  • Automatic diluent addition valve adds diluent during descent or when the loop volume is low
  • Manual diluent addition valve adds on board or off board diluent for loop flushing
  • Gases - Air, Trimix, and Heliox
  • Manual oxygen addition valve allows for manually controlling oxygen PPO2
  • High performance open circuit Bail Out Valve option
  • Integral harness and BC or Backplate standard makes the Prism 2 ready to dive out of the box
  • Full range of wings/harness gives the ultimate customization
  • Accepts 13, 19, or 30 cu.ft. cylinders for flexible gas management
  • Eye level LED Primary display provides easy to monitor system status
  • Displays PPO2 for each oxygen sensor is used to control PPO2 manually & assure electronics system is nominal
  • External power switch is easy to power on
  • Easy calibration with a push button O2 calibration 
  • Large OLED Secondary Display is easy to read, even for your buddy
  • PPO2 Monitoring of Three Sensors Continuous display of each sensor’s PPO2, mv reading easy to access
  • Closed Circuit & Open Circuit, 5 gases supports diluent switching & Multi-gas mix dive plans
  • 2 button push OC bailout - If you have to leave the loop, quickly switches to bailout support
  • CNS Tracking based on real time oxygen exposure
  • Software Update via web
  • Dive Log download and software updates via Bluetooth

 

 

Secondary Dive Computer

  • Depth, time and oxygen sensor display 
  • Bühlmann decompression model with gradient factors conservatism 
  • Optional VPM-B decompression model 
  • Imperial and metric displays 
  • DiveCAN communications for robust connections to rebreathers 
  • A menu system that adapts to diving status 
  • Automatic turn off after 15 minutes on the surface 
  • Depth sensor rated to 450 feet/140 meters of seawater 
  • Dive Planner
  • Any combination of oxygen, nitrogen, and helium (Air, Nitrox, Trimix) 
  • Open and closed circuit, switchable during a dive 
  • 5 CC and 5 OC gases 
  • Gases can be changed and added during a dive 
  • CNS tracking
  • No lockout from violating deco stops 
  • Automatic PPO2 set-point switching (configurable) 
  • Two PPO2 set-points, each of which can be set between .5 and 1.5 
  • Flexible user replaceable battery. Almost any ‘AA’ type 
  • Tilt compensated digital compass (Petrel 2 only) 
  • 1000 hour dive log memory 
  • Log downloads and firmware upgrades using Bluetooth

 

Heads up Display (HUD)

  • PPO2 display from 3 oxygen sensors. 
  • Modified Smither’s code blink pattern. 
  • Bright light emitting diodes with vibrant colors. 
  • Color-blind blink pattern (optional setting). 
  • Wet contacts for automatic turn-on. 
  • Option to flip orientation - can be positioned on either side of the rebreather mouthpiece. 
  • DiveCAN® communications interface for robust data transmission and easy upgrades, disassembly and repairs. 
  • Bright red end-cap LED for buddy warnings. 
  • Automatic brightness control optimizes viewing in all conditions. 
  • Red color only used for unsafe PPO2 warnings.
  • Shoulder mounted counterlungs provide easy breathing with low hydrostatic loading
  • Lowest Work of Breathing in industry at 0.94 J/L - Tested at 100M by ANSTI
  • Unit weight when fully charged, in standard configuration - approx. 47lbs
  • 3.5 Liter split counterlungs allows inhale and exhale counterlungs for high work loads
  • Counterlung drains make it easy to remove water during a dive
  • All gas lines external to the breathing loop prevents leaks from affecting the PPO2
  • Automatic diluent addition valve adds diluent during descent or when the loop volume is low
  • Manual diluent addition valve adds on board or off board diluent for loop flushing
  • Gases - Air, Trimix, and Heliox
  • Manual oxygen addition valve allows for manually controlling oxygen PPO2
  • High performance open circuit Bail Out Valve option
  • Integral harness and BC or Backplate standard makes the Prism 2 ready to dive out of the box
  • Full range of wings/harness gives the ultimate customization
  • Accepts 13, 19, or 30 cu.ft. cylinders for flexible gas management
  • Eye level LED Primary display provides easy to monitor system status
  • Displays PPO2 for each oxygen sensor is used to control PPO2 manually & assure electronics system is nominal
  • External power switch is easy to power on
  • Easy calibration with a push button O2 calibration 
  • Large OLED Secondary Display is easy to read, even for your buddy
  • PPO2 Monitoring of Three Sensors Continuous display of each sensor’s PPO2, mv reading easy to access
  • Closed Circuit & Open Circuit, 5 gases supports diluent switching & Multi-gas mix dive plans
  • 2 button push OC bailout - If you have to leave the loop, quickly switches to bailout support
  • CNS Tracking based on real timeoxygen exposure
  • Software Update via web
  • Dive Log download and software updates via Bluetooth

More from this collection

To Top